Enecsys microinverters are an innovative technology that offer a revolutionary approach to solar PV system design and installation. Instead of having a conventional, centralised solar inverter, Enecsys microinverters are attached directly to the back of solar panels, thereby avoiding one of the most common issues in conventional solar arrays: efficiency loss in an entire ‘string’ of panels due to the shading of just one.

ENECSYS MICRO INVERTERS

Enecsys Features

 

Enecsys’s technology avoids this issue by allowing each module to produce power on an individual basis, not influenced by neighbouring panels in the same string. This affords system owners and operators a number of benefits, including:



Greater Reliability/Production: If one or more panels are shaded or experience a loss in performance, the rest of the system will function independently. Fewer power losses in panel strings and wiring;

Improved Safety: With micro inverters, low AC currents are the output from the panels, therefore no dangerous DC wiring on the installation location;



Extended Lifetime and Increased Reliability: Micro inverters are supplied with a warranty of approximately the lifetime of the PV system, due to the use of thin film capacitors only (No electrolytic capacitors, no fans and moving parts);


 

Enecsys SMI-D240W-60

>    Max AC output power: 225W

>    MPPT voltage range: 23-35V

>    Max recommended units per 20A branch circuit: 17
>    Compatible with most 60 cell modules

Enecsys SMI-D480W-60

>    Max AC output power: 450W

>    MPPT voltage range: 24-35V

>    Max recommended units per 20A branch circuit: 8
>    Compatible with most 60 cell modules

Enecsys SMI-D360W-72

>    Max AC output power: 340W

>    MPPT voltage range: 30-42V

>    Compatible with most 72 cell modules

Enecsys SMI-S200W-72, 240W-72

>    Max AC output power: 185W and 225W

>    MPPT voltage range: 30-42V

>    Compatible with most 72 cell modules

Enhanced Performance Monitoring: Inverters on each panel allows the system owner/operator to monitor the performance of individual panels and quickly identify and troubleshoot problems;



Simplified Design and installation: Since each panel contains its own inverter, there is no need to be concerned with string layout, special wiring for the inverter, or mixed orientations–panels can be installed at all reasonable orientations, including just one lone panel on, for example, a west or each facing roof;

Widest Ambient Temperature Range (-40°C to +85°C): Outstanding performance even in extreme conditions.

Enecsys mikro inverteri su inovativna tehnologija  koja nudi revolucionarni pristup projektiranju i ugradnji solarnih PV sustava. Umjesto uobičajenog centraliziranog i konvencionalnog mrežnog pretvarača, Enecsys mikro inverteri se priključuju izravno na poleđinu solarnih panela time izbjegavajući jedan od najčešćih problema u konvencionalnim solarnim nizovima: gubitak učinkovitosti u nizu zbog sjene na samo jednoj.

Enecsys Značajke

 

​Enecsys tehnologija u startu zaobilazi većinu problema dopuštajući svakom modulu proizvodnju energije na individualnoj bazi; bez mogućeg negativnog utjecaja susjednih panela u istom nizu pružajući vlasniku sustava brojne prednosti:



Veća pouzdanost/Proizvodnja: Ako jedan ili više panela imaju gubitak proizvodnje zbog hlada/sjene ili tehničkih problema, ostatak sustava će i dalje nastaviti funkcionirati samostalno. Manji gubici energije u ožičenjima i žicama panela;

Poboljšana sigurnost: Sa mikro inverterima, niska AC struja izlazi iz panela, stoga nema opasnog DC ožičenja na mjestu ugradnje.



Produženi vijek trajanja i Povećana Pouzdanost : Mikro pretvarači se isporučuju s gotovo jednakom garancijom kao i sami moduli zahvaljujući upotrebi tankoslojnih kondenzatora(nema elektrolitskih kondenzatora, bez ventilatora i pokretnih djelova)


 

Enecsys SMI-S200W-72, 240W-72

>    Max AC output power: 185W and 225W

>    MPPT voltage range: 30-42V

>    Compatible with most 72 cell modules

Enecsys SMI-D240W-60

>    Max AC output power: 225W

>    MPPT voltage range: 23-35V

>    Max recommended units per 20A branch circuit: 17
>    Compatible with most 60 cell modules